Electroless nickel plating, or EN, uses a chemical reaction to deposit a nickel-phosphorus alloy onto a wide range of substrates. Unlike electrolytic plating, it needs no electric current. The reaction is autocatalytic, which means the coating keeps building on its own once it starts. That’s why EN covers internal and external surfaces evenly, no matter how complex the part’s shape.

Request a Quote Talk With a Plating Expert

How Electroless Nickel Plating Works

Since the process is a chemical reaction, the resulting thickness and coverage of the part is more easily controlled, as long as the surface is sufficiently prepared to allow for EN adhesion.

Deposition occurs in electroless nickel chemical baths that contain a solution of:

  • Metal ions
  • Chelates
  • Reducing and complexing agents
  • Stabilizers

Choose Between Mid and High Phosphorus Electroless Nickel

The phosphorus content in an EN deposit shapes its mechanical, thermal, and electrical properties. At Electro-Spec, we offer mid- and high-phosphorus baths so you can match the deposit to your application. The table below compares the key properties of each.

EN Type Hardness As Plated
(HK100)
Thermal
Conductivity
(CAL/CM/SEC/°C)
Tensile Strength
(MPa)
Electrical Resistivity
(mOHM-CM)
High Phosphorus 450 - 525 0.01 650 - 900 75 - 110
Mid Phosphorus 500 - 600 0.012 800 - 1000 40 - 70

The two EN deposits offered at Electro-Spec suit different applications:

  • Mid Phosphorus: Alloys provide high-speed deposit rates and appealing bright or semi-bright finishes.
  • High Phosphorus: Alloys provide superior corrosion protection and are most resistant to harsh environments.

What Electroless Nickel Delivers and Where It Is Used

Resulting Properties
  • Corrosion Resistance
  • Wear Resistance (due to a hardened deposit)
  • Uniformity in Thickness of Deposits
  • High Solderability and Weldability of Parts
  • Bright and Reflective Finish (depending on substrate finished)
Applications
  • Aerospace Components
  • Electrical Equipment
  • Packaging & Handling Machinery
  • Chemical Manufacturing and Transport Equipment
  • Molds & Dies
  • Food Service Equipment
  • Plastics Manufacturing Equipment
  • Oil & Gas Components
  • Printing Industry Equipment
  • Automotive Components

Electroless Nickel Plating Standards

ASTM B733-97

AMS 2404E

AMS 2404B

MIL-C-26074E


See Electroless Nickel Plating at Work

Read how a medical manufacturer solved chronic plating problems with Electro-Spec.

Read the Electroless Nickel Case Study


Electroless Nickel Plating FAQs

When should I choose electroless nickel over electrolytic nickel?

Choose EN when the part has deep holes or blind features where consistent thickness matters, since electrolytic nickel plating builds thinner in recessed areas. EN is also the stronger option for harsh environments and rigorous corrosion testing, because the phosphorus in the deposit adds protection that electrolytic nickel lacks. EN typically costs more than electrolytic nickel, so the premium makes the most sense when geometry or corrosion requirements decide the outcome. Compare both processes side by side.

What is the difference between mid and high phosphorus electroless nickel?

Mid-phosphorus EN offers faster deposition rates and a bright to semi-bright finish. High-phosphorus EN provides superior corrosion resistance, and the higher the phosphorus, the more resistant the deposit is to harsh environments. High-phos EN with 10% or more phosphorus is also effectively non-magnetic, which matters for RF and high-frequency designs where a magnetic nickel layer under gold would cause interference.

Does electroless nickel plate evenly inside bores and threads?

Yes. Because chemistry rather than electrical current drives the reaction, EN builds at the same rate on every surface, including internal bores and threads. That makes EN the specification of choice when a thickness requirement has to be met deep inside a part, as long as the surface is properly prepared for adhesion.

What should I specify on my print for electroless nickel plating?

Start with the specification on your print, such as ASTM B733, and add the phosphorus type and the service class that sets thickness. The phosphorus type should match the end use, because mid-phos EN on a part that needs high corrosion protection is a mismatch worth catching before production. Our engineers can review your drawing while the design is still in development, which is far easier than correcting a batch that fails testing.

Can electroless nickel be used under gold plating?

Yes, gold over EN is the combination we specify most often for space applications. The EN underlayer provides corrosion resistance and a uniform, well-adhered base, and the gold topcoat delivers stable, oxidation-free conductivity. For surfaces that will be soldered, keep the gold between five and twenty microinches so it protects the nickel without risking embrittlement. See how we plate for space.

Nickel Plating Resources

Electroless Nickel vs. Electrolytic Nickel Plating

See a side-by-side comparison of both processes and the framework our engineers use to choose between them.

Read the Article

Electroplating for Space

Learn how gold over electroless nickel protects conductivity and corrosion performance in orbit.

Read the Article

How Electroplating Enhances Solderability

Compare finish systems for solderable parts, including where electroless nickel fits, before you finalize your spec.

Read the Article